Contact Us

Gas Fitter In Melbourne: Leak Detection, Repairs And Line Renewals

Licensed Gas Fitting, Pressure Tested And Certified

A faint smell of gas near the cooktop, or a heater that will not stay lit, needs a licensed gas fitter rather than a wait-and-see. Measured Plumbing covers gas leak detection, appliance connections, repairs and full gas line renewals across Melbourne’s inner suburbs. We pressure test every installation before signing it off, so you know the repair holds rather than assuming it does.
CALL 0416 812 147

If You Can Smell Gas Right Now

Natural gas has an odourant added to it so a leak is noticeable before it becomes dangerous. If the smell is strong, deal with the property first and the diagnosis second.

Turn the gas off at the meter. The isolation valve sits beside the meter and needs only a quarter turn.

Open doors and windows so the gas can clear instead of pooling in a room.

Leave switches, appliances and extraction fans alone. A switch throws a small spark.

Keep the property clear of naked flame, including cigarettes, candles and pilot lights.

If the smell is strong or coming from outside the building, contact the gas distributor's emergency line before anything else.

A leak that comes and goes is still a leak. Gas migrates along the path of least resistance, so the smell often shows up in a different room from the fault. Outside standard hours this is attended as an emergency call-out.
REQUEST A CALLBACK

Gas Fitting Services Across Melbourne

Most gas work falls into three groups: finding a fault, connecting an appliance, or replacing pipework that has reached the end of its life. The size of the existing line and the total load of the appliances on it decide what is possible at a property.

Gas leak detection

The installation isolated, sectioned and pressure tested to find where the loss is occurring.

Gas leak repair

Failed joints, corroded runs and damaged sections repaired or replaced, then retested.

Appliance connections

Cooktops, ovens, heaters, gas hot water units and outdoor bayonets connected and commissioned.

Gas line installation

New runs from the meter to an appliance, sized for the load the appliance actually draws.

Gas line renewals

Old galvanised or undersized pipework replaced where it can no longer carry the appliances on it.

Meter relocations and upgrades

Coordinated with the gas distributor where the meter position or capacity is the constraint.

Decommissioning and capping

Redundant points sealed off correctly during renovations or appliance changeovers.

How A Gas Leak Is Actually Found

Sniffing around a cooktop is not a diagnosis. The installation is isolated at the meter and put under test pressure, and the gauge is watched to confirm whether the system is losing gas at all. If it is, the line is broken into sections so the loss can be narrowed to a single run, appliance or joint. Electronic detection and leak solution pinpoint the exact fitting once the section is known.

That order matters. It separates a genuine leak from an appliance fault, a blocked flue or a burner that needs servicing, and it means only the pipework that has failed gets opened up. A property losing water instead of gas needs water leak detection, which is a different test entirely.

ARRANGE A GAS LEAK TEST

Why Choose Measured Plumbing For Gas Work

Tested before handover

We pressure test every gas installation before handing it back.

Load sized properly

We calculate pipe runs against total appliance demand.

15+ years' experience

Including commercial construction and fit-out work.

Documented in writing

We confirm what gets repaired, replaced and tested before starting.

Compliance paperwork handled

We issue certification for gas fitting work where it applies.

Tidy finish

We run pipework neatly, seal penetrations and leave the site clean.

  • Testimonials

Recent Customer Feedback

I was extremely impressed by the efficiency, professionalism and service provided. Cannot recommend them enough!

Jack Sassella Google Review

Had an issue with my washing machine, hot water service and toilet all in the one day, ultra quick turnaround and couldn't have been more thankful for the job done. Completely saved the day and will absolutely use again for my next issue.

Chris Bowen Google Review

I recently used this new plumbing company and couldn't be happier with the experience. From the initial phone call through to the completion of the job, the team was professional, friendly, and incredibly responsive. Read More

Sam Staples Google Review

Compliance And Certification On Gas Work

Gas fitting in Victoria is licensed work, carried out to the AS/NZS 5601 gas installation standard and regulated for safety by Energy Safe Victoria. Prescribed gas fitting work carries a compliance certificate, the document proving the installation was tested and signed off by a licensed gas fitter.

It matters most at three moments: selling a property, insuring a claim, and handing a rental back to a managing agent. Measured Plumbing keeps the test results and the paperwork together, so a homeowner, an owners corporation or an agent has the full record.

REQUEST A WRITTEN QUOTE

How A Gas Job Runs

  • We inspect the installation and appliances, and record the existing pipe sizes and meter capacity.
  • A pressure test establishes whether the system is holding, and where it is not.
  • We set out the work in writing: repair or renewal, length of run, access needed and what is excluded.
  • We carry out the work, isolating the gas only for as long as the job requires.
  • The installation is pressure tested again and every appliance commissioned and checked for correct operation.
  • We issue certification where the work is prescribed, and explain the results before leaving.
REQUEST A CALLBACK

Gas Plumbing And Gas Fitting FAQs

0416 812 147

Gas Plumbing And Gas Fitting FAQs

Gas work is a separate licensed class, so the tradesperson needs a current gas fitting licence alongside a general plumbing registration. Measured Plumbing holds gas fitting registration and carries out gas work under it.
A pressure test at the meter answers it. If the installation holds pressure, the pipework is sound and the fault sits in the appliance, its regulator or its flue. If it drops, the leak is in the line and gets sectioned down from there.
Often yes, provided the point is in the right position and the line can carry the appliance's rated input alongside anything else on it. Where it cannot, a new run is installed back to a point with enough capacity.
Prescribed gas fitting work carries a compliance certificate confirming the installation was tested and complies with the standard. Minor servicing generally does not, and you will be told which applies before the job starts.
A straightforward test and isolation is usually completed in a single visit. Concealed pipework, multiple appliances or a leak under a slab takes longer, because each section has to be tested separately to narrow it down.
After the installation has been inspected and tested. The written quote covers the pipework being replaced, the appliances being connected or commissioned, access requirements, testing and certification, and anything deliberately left out.

Get The Gas Work Done Properly

Gas faults do not improve with time, and an appliance connected to an undersized line will keep underperforming no matter how many times it is serviced. Measured Plumbing will test the installation, tell you plainly what it shows, and repair or renew it to standard with the certification to match. Servicing Richmond, the inner city and the surrounding suburbs, with the scope agreed before work starts.

CALL 0416 812 147
Call Now